Dolby Laboratories DP524 Manual de usuario descargar pdf (Pagina 21)

DP571 Dolby

E Encoder User’s Manual Setup and Status Checks

because Dolby E uses the entire audio payload of an AES pair, thereby creating the

appearance of full-scale audio on the VTR.

Note: Do not adjust the input or output volume controls when recording or playing

back Dolby E data, as this action will corrupt the data stream and render it

undecodable.

3.6 Monitoring Status Using the Status Menu

The front-panel LCD provides detailed status information on a series of status

screens. You can access the main status menu by pressing Shift then Setup at any

time, and from there you can scroll through the remaining status screens using the

right and left cursor buttons. The status screens display the device’s current status and

are not used to set values. Use the setup mode menus to set new values.

3.6.1 Main

Dolby E

5.1+2 20bit

The main screen displays the active program configuration and the bit depth. This is

the standard display for most applications.

3.6.2 External Metadata

Ext Metadata In

ENTER to View

From this status screen, pressing

Enter displays the program configuration of external

metadata, if one is present. Use the arrow keys and Enter to navigate through the

individual metadata parameters of each program. Pressing Esc returns you to the

External Metadata status screen. Use this screen to verify that the program

configuration of incoming metadata matches the program configuration being used by

the encoder.

3-5

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 44 45

Sin comentarios

Dolby Laboratories DP524 Manual de usuario Pagina 21